Attention

You can now run different PHP versions per project: Release v3.0.0-beta-0.1

Add project hosts entry on MacOS

On MacOS, custom DNS entries can be added to the /etc/hosts and will take precedence over the same entries provided by any DNS server.

Table of Contents

Assumption

In order to better illustrate the process, we are going to use two projects as an example. See the following table for project directories and TLD_SUFFIX.

Project directory TLD_SUFFIX Project URL Required DNS name
project-1 loc http://project-1.loc project-1.loc
www.project-1 loc http://www.project-1.loc www.project-1.loc

Docker for Mac

When using Docker for Mac you can use 127.0.0.1 for the IP address.

  1. Open /etc/hosts with admistrative privileges or via sudo with your favorite editor

    host> sudo vi /etc/hosts
    
  2. Add DNS records for the above listed examples:

    /etc/hosts
    127.0.0.1  project-1.loc
    127.0.0.1  www.project-1.loc
    
  3. Safe the file and verify the DNS entries with the ping command

    host> ping -c1 project-1.loc
    
    PING project-1.loc (127.0.0.1) 56(84) bytes of data.
    64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.066 ms
    
    host> ping -c1 www.project-1.loc
    
    PING www.project-1.loc (127.0.0.1) 56(84) bytes of data.
    64 bytes from localhost (127.0.0.1): icmp_seq=1 ttl=64 time=0.066 ms
    

Docker Toolbox

When using the Docker Toolbox, you cannot use 127.0.0.1 for DNS entries, but rather need to use the IP address of the Docker Toolbox machine instead.

For this example we will assume the Docker Toolbox IP address is 192.168.99.100.

  1. Open /etc/hosts with admistrative privileges or via sudo with your favorite editor

    host> sudo vi /etc/hosts
    
  2. Add DNS records for the above listed examples:

    /etc/hosts
    192.168.99.100  project-1.loc
    192.168.99.100  www.project-1.loc
    
  3. Safe the file and verify the DNS entries with the ping command

    host> ping -c1 project-1.loc
    
    PING project-1.loc (192.168.99.100) 56(84) bytes of data.
    64 bytes from localhost (192.168.99.100): icmp_seq=1 ttl=64 time=0.066 ms
    
    host> ping -c1 www.project-1.loc
    
    PING www.project-1.loc (192.168.99.100) 56(84) bytes of data.
    64 bytes from localhost (192.168.99.100): icmp_seq=1 ttl=64 time=0.066 ms